PreamplifiersOur preamplifiers provide complete detector interfacing. The proper bias voltage and input stage are selected for each detector type. The preamplifier output is suitable for driving test equipment, A/D cards and instrument circuitry.

Our preamplifiers are fully tested and integrated with your detector when supplied, or a simulated detector. Each amplifier is tested with methods most closely matching the final application. From DC response to femtosecond laser pulses, our preamps are optimized to provide the best performance for each task.

  • MCT-1000 (HgCdTe) Detector Preamplifier

    The MCT-1000 was specifically designed to operate with Photoconductive Mercury Cadmium Telluride detectors. The low noise and high gain aspects coupled with a precision constant voltage bias provide an ideal complement to these detectors.

  • MCT-1000 (HgCdTe) Detector Preamplifier

    The MCT-1000 was specifically designed to operate with Photoconductive Mercury Cadmium Telluride detectors. The low noise and high gain aspects coupled with a precision constant voltage bias provide an ideal complement to these detectors.

  • MCT-1000DC

    The MCT-1000DC was specifically designed to operate with Photoconductive Mercury Cadmium Telluride detectors. The low noise and high gain aspects coupled with a precision constant voltage bias provide an ideal complement to these detectors.

  • PVMCT-1000

    The PVMCT-1000 was specifically designed to operate with Photoconductive Mercury Cadmium Telluride detectors. The low noise and high gain aspects coupled with a precision constant voltage bias provide an ideal complement to these detectors.

  • MCT-1000HS

    The MCT-1000HS was specifically designed to operate with Photoconductive Mercury Cadmium Telluride detectors. The low noise and high gain aspects coupled with a precision constant voltage bias provide an ideal complement to these detectors.

  • Array Detector Preamplifiers

    M3 offers multi-channel preamplifiers for small and large array detectors. These preamplifiers are the same high quality low noise amplifiers as the single channel unit, packaged in multi-channel housings. Bias and Gain adjustments allow corrections for signal differences between array elements.

  • INSB-1000 (INSB) Detector Preamplifier

    The INSB-1000 was specifically designed to operate with Photovoltaic Indium Antimonide detectors. The low noise and high gain aspects, together with a zero volt bias, provide an ideal complement to these detectors.

  • INSB-1000DC (INSB) Detector Preamplifier

    The INSB-1000DC was specifically designed to operate with Photovoltaic Indium Antimonide detectors. The low noise and high gain aspects, together with a zero volt bias, provide an ideal complement to these detectors.

  • INSB-1000HS (INSB) Detector Preamplifier 2mm

    The INSB-1000 was specifically designed to operate with Photovoltaic Indium Antimonide detectors. The low noise and high gain aspects, together with a zero volt bias, provide an ideal complement to these detectors.

  • INSB-1000HS (INSB) Detector Preamplifier 1mm

    M3 offers multi-channel preamplifiers for small and large array detectors. These preamplifiers are the same high quality low noise amplifiers as the single channel unit, packaged in multi-channel housings. Bias and Gain adjustments allow corrections for signal differences between array elements.

  • PYRO-1000

    TYPE: DTGS and LiTaO3
    BANDWIDTH: 1.5Hz - 10kHz
    GAIN: 50-1000

  • PB-1000

    TYPE: PbS/PbSe
    BANDWIDTH: 1.5Hz - 50kHz
    GAIN: 2-200

  • INGAAS-1000

    TYPE: InGaAs
    BANDWIDTH: 1.5Hz - 50kHz
    GAIN: 5-100

  • VA-1000

    TYPE: Any
    BANDWIDTH: 10Hz - 500Hz
    GAIN: 100-3000